Mechanical Toggle Relay with 12 V and limit continuous currents of 10 A (NC) and 20 A (NO)
The time-limited toggle relay with 12 V and the compact 30 x 30 x 30 mm housing
The time limited toggle Relay 12V with M3 housing and individual impulse time
Mechanical toggle relay with 24 V and limit continuous currents of 10 A (NC) and 20 A (NO)
The time-limited toggle relay with 24 V and the compact 30 x 30 x 30 mm housing
The time limited toggle Relay 24 V with M3 housing and individual impulse time
Compact switch off delay Time Relay with 12 V
Compact Time Relay with switch off delay 24 V
The 12 V Universal Flasher LED is suitable for LED lights and lights with incandescent lamps.
The 24 V Universal Flasher LED is suitable for LED lights and lights with incandescent lamps.
The Universal Flasher Unit 9 - 30 V for turn signal and hazard warning light applications with compact 30 x 30 x 30 mm housing
The Voltage Range Monitor is used to switch loads off when the voltage exceeds/drops below an upper/lower threshold voltage and switch loads on again when the voltage enters the range between upper/lower threshold voltages.
The 24 V voltage switches are used for area monitoring. They switch off the consumer in case of exceeding or falling below a defined threshold voltage.
Adjustable time relay with switch off delay 12 V
Adjustable Time Relay with switch on delay 24 V
The Frequency Monitor 24 V is used to switch loads on/off when the input signal frequency exceeds/drops below a defined threshold frequency.
The Load Dump Protection Module is used to protect against voltage spikes.