The Universal Flasher LED is suitable for LED lights and lights with incandescent lamps. This flasher unit supports left/right turn signals as well as hazard warning lights doubling flasher frequency in case of LED/lamp failure. Terminal C is the turn signal LED/lamp control output. If lights fail during flasher mode the flashing frequency on terminal C doubles (C2 function). When the supply voltage is applied to the left or right turn signal input the unit starts flashing left or right immediately. When the supply voltage is connected to the hazard warning lights input or to the left and right turn signal inputs simultaneously the hazard warning lights function is activated. LED/lamp failure can be detected via current threshold monitoring (customconfigurable on request) for each of the 4 output channels resulting in a doubling of the flasher frequency (C2 function). However, the flashing frequency will not double while the hazard warning lights mode is active.
Name | Value |
---|---|
Dimensions | 30 × 30 × 40 mm |
Housing material | Plastic |
Number of pins | 9 |
In-/Outputs (total) | 7 |
Operating voltage | 24 V |
Name | Value |
---|---|
Number of pins | 9 |
In-/Outputs (total) | 7 |
Inputs (total) | 3 |
Inputs (digital) | 3 |
Outputs (total) | 4 |
Outputs (digital) | 4 |
Processor family | Freescale HCS08 |
Processor | 8 bit |
Blink frequency | 90 1/min |
Temperature range | -40 to 85 °C |
Protection class | IP53 |
Operating voltage | 24 V |
Flasher output | Max. 21 W per channel |
Status output terminal C | 3 W |
Current threshold at 24 V | 70 mA |
Name | Model | Connection diagram | Order no. | ||
---|---|---|---|---|---|
Universal Flasher LED 24 V | 4 channel | S1 | 1.007.210.000 |
Required accessories | Article number | |
---|---|---|
Socket ST FL 9-pin 5 x 6.3 / 4 x 2.8 | 1.017.002.00 | |
Socket package watertight 40 mm | 1.017.010.40 | |
FASTON terminal for latching 2.8 mm 0.5 – 1.0 mm² | 105292 | |
FASTON terminal for latching 6.3 mm 1 mm² | 102355 | |
FASTON terminal for latching 6.3 mm 1.5 – 2.5 mm² | 103064 | |
Housing bracket | 1.017.080.00 |
Current threshold = 140 mA at 12 V / 70 mA at 24 V
If e.g. the left turn signal is active, then both channels become active for the left side. If there is no load on a channel, the flasher flashes at twice the flashing frequency.
So a load must be attached to both channels.
The reprogramming can only be carried out by MRS Electronic.