FAQ - MRS Electronic

Filter

All questions (US)

Frequently asked questions

Does the Micro PLC CAN LIN also have LIN wake-up?

CAN I/O PLC LHS

The outputs do not supply voltage

M2600 ECO CAN PLC

After switching off Kl15 on the CAN I/O, the module remains active.

CAN I/O PLC CAN I/O PLC Waterproof

More questions …

Does the CAN I/O CAN-Wake-up?

CAN I/O PLC CAN I/O PLC Waterproof

How fast are the inputs on the CAN I/O?

CAN I/O PLC CAN I/O PLC Waterproof CAN I/O PLC Waterproof PRO V2

How can I program the Frequency CNT measurement in C code?

CAN I/O PLC CAN I/O PLC Waterproof CAN I/O PLC Waterproof PRO V2

How fast is the switching time at the output from a trigger input?

Pulse Relay M3 12 V Pulse Relay M3 24 V Pulse Relay M1 compact 12 V Pulse Relay M1 compact 24 V Pulse Relay adjustable 12 V Pulse Relay adjustable 24 V

Can the customer reprogram the current thresholds at the universal flasher itself?

Universal Flasher LED 12 V Universal Flasher LED 24 V Universal Flasher Unit 9 - 30 V

Do all four channels have to be occupied or is it sufficient to connect only the channels "left front" and "right front" with a sufficient load?

Universal Flasher LED 12 V Universal Flasher LED 24 V Universal Flasher Unit 9 - 30 V

Which threshold values do the outputs have?

Universal Flasher LED 12 V Universal Flasher LED 24 V Universal Flasher Unit 9 - 30 V

Can the voltage thresholds and the delay times also be chosen freely?

Voltage Monitor 12V Voltage Monitor 24V Voltage Monitor 9 - 30 V

Can the frequency thresholds also be chosen freely?

Frequency Monitor 12 V Frequency Monitor 24 V Frequency Monitor 9-30 V

How do I put the module in Sleep_Mode?

Motor Controller 5A CAN Motor Controller 10A CAN

Can the motor full bridge also be operated as a half bridge in parallel?

Motor Controller 5A CAN Motor Controller 10A CAN Motor Controller 10A CAN PRO

Direction of rotation reversal does not work if a 1 or 0 is alternately applied to the "Direction" input.

Motor Controller 5A CAN Motor Controller 10A CAN Motor Controller 10A CAN PRO

Are the HSD outputs internally secured?

CAN Gateway Module

Can the HSD outputs also measure the current?

CAN Gateway Module

Is the load-side power supply running via KL30 or KL15?

CAN Gateway Module

Is the CAN relay box CAN wake-up capable?

CAN Relay Box

What is the quiescent current of the CAN relay box?

CAN Relay Box

What is the current consumption in sleep mode (F15 inactive)?

Universal Gateway 5x CAN

Can the HSD outputs also be switched in parallel?

CAN/RS485 Gateway CAN Gateway Module CAN I/O PLC CAN I/O PLC Waterproof Micro PLC CAN 4 I/O CAN I/O PLC Waterproof PRO V2 M2600 ECO CAN PLC M3600 CAN PLC

Which minimum output voltage does the Micro PLC CAN 4 ANA provide?

Micro PLC CAN 4 ANA

How can the analog input be switched from voltage to current?

Micro PLC CAN 4 ANA

Does the Micro PLC CAN LIN also have CAN wake-up?

CAN I/O PLC LHS

What is the quiescent current in sleep mode?

CAN I/O PLC LHS

Can the module be ordered as Master or Slave?

Micro PLC CAN LIN Micro Gateway CAN I/O PLC LHS

On the CAN I/O WP PRO V2, the current output does not regulate properly.

CAN I/O PLC Waterproof PRO V2

How fast can the ADC converter process the analogue values and at what time interval are they available to the program?

M2600 ECO CAN PLC M3600 CAN PLC

Is the M2600 ECO CAN PLC capable of CAN wake-up?

M2600 ECO CAN PLC

What function does the "IDENT" pin have?

M2600 ECO CAN PLC

Can different PWM signals (for example 8 V, 6 V or 12 V) be processed with the M2600?

M2600 ECO CAN PLC

How can the duty cycle of a frequency be determined?

M2600 ECO CAN PLC

Is there a digital input to measure the frequency?

M2600 ECO CAN PLC

Which resistance values Pull Up and Pull Down are possible?

M2600 ECO CAN PLC

Sleep mode does not work / module draws too much power in standby.

M2600 ECO CAN PLC

What is the function of the status LED?

M2600 ECO CAN PLC

Is the order version 1.300.300.00 - Do I have the function "CAN-Wake-up" on all 3 CAN interfaces?

M3600 CAN PLC

Which function block do I use for the motor controller 10 A CAN (PRO)?

Motor Controller 10A CAN Motor Controller 10A CAN PRO

Module is found during the scan, but when a program is ready to be flashed, in the log window only "MCU: Program Download" appears and the flash process does not start.

Softwaretool MRS Developer Studio

Changing the boot loader ID, module name or baud rate of the bootloader does not apply the changes, even though the changes were written without an error message.

Softwaretool MRS Developer Studio

When reading out the module data, a timeout error occurs.

Softwaretool MRS Developer Studio

After clicking on "Scan", the log window will say "SCAN COMPLETED", but no module found will be listed even though it is connected.

Softwaretool MRS Developer Studio

Can the outputs be switched to ground instead of supply voltage?

Generel Product Questions

Can the analog inputs be used in parallel as digital inputs?

Generel Product Questions

How to correctly install the terminating resistor of a CAN cable?

Generel Product Questions

What is the pin assignment of a Sub-D 9pin connector with CAN cable?

Generel Product Questions

Do the modules also have an analog output?

Generel Product Questions

Where are the thresholds for the digital inputs?

Generel Product Questions

When opening the "MCU-Flasher" window, the message "CAN interface is already occupied by a program or not connected" appears even though the PEAK-USB adapter is connected

Softwaretool MRS Developer Studio

Is there a minimum order value when ordering?

Order Process

Where do I send my order?

Order Process

It seems after a test of the program, as if a signal does not come to the exit, although it was drawn in the graphic programming.

All questions (US) Softwaretool MRS Developer Studio

What is the quiescent current of the Micro SPS CAN 4 I/O in sleep mode?

All questions (US) Micro PLC CAN 4 I/O

How can the PWM outputs on the M2600 ECO CAN PLC be activated?

All questions (US) M2600 ECO CAN PLC

Is there a terminating resistor on the CAN relay box?

CAN Relay Box

Is there a terminating resistor on the CAN relay box?

CAN Relay Box